ComponentBuilt to work.
PLEN

Component / Functional objects

Built to
work.

Small, useful objects designed for real spaces. Explore the collection, find your fit and print your next everyday fix.

Explore collection
Graphite visualization of Broom Holder V2 showing the shaped grip from above Broom Holder V1, compact tool grip CableRail with seven cable positions Watering Reservoir, two-part ring for plants
Small objects. Real purpose.Desk · Home · Workshop · Garden
Find your next print Original Component designs

Designed around real life

Small objects.
Everyday purpose.

A cable that stays within reach. A tool back in its place. Water right where it is needed. Useful designs that begin with an everyday problem and end on your printer.

Component / Field manual

KNOW YOUR
OBJECT.

A little know-how.
A better everyday setup.

Explore the guides. Make it work for you.

FIELD NOTE / 01BUILT TO WORK.
Broom Holder V2: original dimensioned technical drawingBroom Holder V2: lime model from the instruction booklet
15–35mm / best-grip targets

Broom Holder V2

Measure. Choose. Mount.

Five sizes. One measured decision.

Open interactive guide
FIELD NOTE / 02BUILT TO WORK.
CableRail: original dimensioned technical drawingCableRail: lime model from the instruction booklet
C01–C10one to ten cable positions

CableRail

Stick. Route. Reach.

Prepare the surface. Keep your cables within reach.

Open interactive guide
FIELD NOTE / 03BUILT TO WORK.
Watering Reservoir: original dimensioned technical drawingWatering Reservoir: lime model from the instruction booklet
600–1600ml / complete two-part ring

Watering Reservoir

Choose. Fill. Observe.

Two halves. Four capacities. Find your setup.

Open interactive guide
FIELD NOTE / 04BUILT TO WORK.
Broom Holder V1: original dimensioned technical drawingBroom Holder V1: lime model from the instruction booklet
15–35mm / best-grip targets

Broom Holder V1

Measure. Print. Fit.

The compact original. Choose your handle size.

Open interactive guide
FIELD NOTE / 05BUILT TO WORK.
FLOW: original dimensioned technical drawingFLOW: lime model from the instruction booklet
04outlet patterns

FLOW

Aim. Pour. Observe.

Four outlet patterns. Pour into the funnel above the soil.

Open interactive guide
FIELD NOTE / 06BUILT TO WORK.
EPIC FLOW: original dimensioned technical drawingEPIC FLOW: lime model from the instruction booklet
01–08outlet directions

EPIC FLOW

Choose your direction.

Direct, dual, four-way or eight-way outlets.

Open interactive guide
FIELD NOTE / 07BUILT TO WORK.
Clothesline Clip: original dimensioned technical drawingClothesline Clip: lime model from the instruction booklet
01piece / no separate spring

Clothesline Clip

Squeeze. Place. Release.

A flexible household peg, printed in one piece.

Open interactive guide
FIELD NOTE / 08BUILT TO WORK.
Utility Gear Clip: original dimensioned technical drawingUtility Gear Clip: lime model from the instruction booklet
120mm / overall length

Utility Gear Clip

Clip. Carry. Organize.

For keys and small accessories. Not for climbing.

Open interactive guide
DESIGN / PRINT / USESwipe to explore / select a guide.

Broom Holder V1

Your handle.
Your size.

Measure where the holder will grip.
Choose the matching print.

Model details
Broom Holder M

Based on the model's size guide. Fit varies with material and printer calibration. Check one print before mounting.

CableRail keeping charging and power cables organized at the edge of a white desk

CableRailEverything within reach.

A rail for one cable or ten.
Stick it where it works for you.

Discover CableRail

CableRail A1 · Adhesive

Your cables.
Your rail.

One cable or a whole desk setup.
Slide to find your size.

Model details
CableRail C05 with five cable positions, shown in 3D

C01–C10. Choose your rail size in the print profiles on MakerWorld. Mount with suitable double-sided tape on a flat surface.

Watering
ReservoirA reserve around your plant.

Two halves. One water ring.
Four capacities for your setup.

Choose your size
Watering Reservoir — official Component cover published on MakerWorld

Watering Reservoir · Two-part ring

More height.
More water.

Four sizes. The same footprint.
Slide to see your reservoir grow.

Model details
Watering Reservoir S, two-part ring with 600 ml capacity

Capacity is for both halves together. Use direct drainage or add a cotton wick. Test the water flow for your plant and soil.

Copper-coloured ribbed Phone Stand on a dark surfacePhone Stand. A different angle on your desk.

Form.
Light.
Purpose.

A place for your phone. A little character for your desk. The short film plays on its own, showing light across the ribbed surface.

A silent close-up shows reflections moving across the copper-coloured ribs of the Phone Stand.Discover Phone Stand

The Component collection

Make something
useful.

Original designs for the spaces you use.
Find your next print on MakerWorld.

17 objects
Broom Holder — official Component cover published on MakerWorld

WorkshopOriginal · V1

Broom Holder

A place for every handle. A one-piece wall mount for brooms, mops and round-handled tools.

CableRail — official Component cover published on MakerWorld

DeskA1 · Adhesive

CableRail

Keep cable ends where you can find them. An adhesive rail for one cable or a whole desk setup.

FLOW — official Component cover published on MakerWorld

GardenOriginal · Watering spike

FLOW

Water below the surface. A simple funnel and spike that guides poured water into the soil.

Broom Holder V2 — official Component cover published on MakerWorld

WorkshopStrong Grip

Broom Holder V2

The reinforced holder. A taller body and two mounting points for round-handled tools.

Desk Organizer — official Component cover published on MakerWorld

DeskCurved caddy

Desk Organizer

Pens, scissors and small tools, together. A full-size caddy with a curved, open layout.

Phone Stand — official Component cover published on MakerWorld

DeskRibbed desk holder

Phone Stand

Give your phone a place on the desk. A ribbed stand for everyday hands-free viewing.

Round Phone Stand — official Component cover published on MakerWorld

DeskRibbed desktop holder

Round Phone Stand

A clear place for your phone. A one-piece round stand with a curved, ribbed cradle.

MacBook Air Vertical Stand — official Component cover published on MakerWorld

DeskVertical · 13 mm slot

MacBook Air Stand

Store a closed MacBook Air upright. A compact, ribbed stand with a nominal 13 mm slot.

Ribbed Desk Tray — official Component cover published on MakerWorld

DeskTwo-channel organizer

Ribbed Desk Tray

Keep small desk items together. A compact ribbed tray with two shallow channels and a closed base.

Square Phone Stand — official Component cover published on MakerWorld

DeskRibbed desk holder

Square Phone Stand

A square place for your phone. A one-piece ribbed stand with a fixed curved cradle.

Soap Tray — official Component cover published on MakerWorld

HomeLinear Series

Soap Tray

A raised place for bar soap. Choose open drainage or a closed base to contain drips.

Shower Hook — official Component cover published on MakerWorld

HomeLinear Series

Shower Hook

A towel hook for a glass edge. Eight opening sizes, without drilling or adhesive.

Wall Hook — official Component cover published on MakerWorld

HomeLinear Series

Wall Hook

A small hook, three mounting choices. For towels, keys and everyday lightweight accessories.

Clothesline Clip — official Component cover published on MakerWorld

HomeSpringless laundry peg

Clothesline Clip

A household clip, printed in one piece. For laundry, drying racks and small everyday jobs.

Watering Reservoir — official Component cover published on MakerWorld

GardenFLOW · Plant ring

Watering Reservoir

A water reserve around your plant. Use direct drainage or add a cotton wick for slower watering.

Utility Gear Clip — official Component cover published on MakerWorld

WorkshopEveryday carry

Utility Gear Clip

Keep small things together. A one-piece clip for keys, bags and lightweight accessories.

EPIC FLOW — official Component cover published on MakerWorld

GardenDeep watering stake

EPIC FLOW

Choose where the water goes. A deep watering stake with four directional outlet patterns.

For people who make and sell

Your printer.
Your small business.

Sell physical prints of eligible Component models with an active commercial membership on MakerWorld.

COMPONENT / COMMERCIAL01

For your next product

All Models
License.

Turn useful prints into
something you can sell.

$4.99USD
/ month
  • Designs ready for your shop.Sell physical prints of eligible Component models.
  • Your storefront. Your customers.Sell through your own shop or marketplace.
  • Make it your own.Choose your filament, colours and finish.
Explore All Models

Commercial rights while your membership is active.

COMPONENT / COMMERCIAL02

For a larger printing operation

Business
License.

More printers.
The same purposeful design.

$14.99USD
/ month
  • All the essentials, included.Everything in the All Models License.
  • Built around your workflow.A plan for multi-printer operations.
  • A direct route for requests.Priority permission requests for your projects.
Explore Business

Review the full terms and join on MakerWorld.

What does the commercial license cover?

Physical 3D prints of eligible Component models, while your subscription is active and paid. Digital files, modified files and remixes may not be sold, shared or redistributed. Component photos, videos and brand assets are not included.

Listings must include the required Component attribution. When a subscription expires, stop producing new prints for sale and pause or remove listings unless renewed. Stock printed during an active license may be sold for up to 30 days after expiry.

Business License includes priority permission requests. It does not automatically permit casting, molding or other non-3D-print mass production. You remain responsible for your products, customers and sales.

Check the full current terms on MakerWorld before joining. Prices and public benefits checked 29 September 2026.

Membership is paid. Following Component on MakerWorld is free.

Component. Built to work.

Good design
has a job to do.

We design functional objects for home, desk, workshop and garden. Original shapes. Practical purpose. Made to become part of your everyday setup.

Follow on MakerWorld

Free to follow. Find new models on our profile.